Working Principle

The two main components of the ‘Control Induction’ hob are the induction heating coils, and the control system. The electronic control system energizes the coils, causing them to generate powerful magnetic fields in the areas immediately above the coils. These fields travel through the vitro ceramic plate on which the pans are placed and eddy currents are formed in the ferromagnetic materials in the pans. The tremendous energy generated by the eddy currents heat the food directly by conducting the heat through the base of the pans and into the food. Good quality pans suited to the particular cooking processes being carried out are essential for obtaining good cooking results.

Safety - This hob is designed for domestic use. With a view to constantly improving our products, we reserve the right to make any changes to their technical, programming or aesthetic features connected with their technical evolution.

Over- Temperature Protection - Temperature sensors are fitted and can monitor the temperatures inside the hob. When an excessive temperature is monitored, the induction hob will stop operation automatically.

Detection of Small Articles - If a pot of less than 80 mm in diameter, small articles (knife, fork, scissors, keys , etc.) or non-magnetic pots (such as aluminum ) are sensed, the buzzers give out an alarm lasting about 30 seconds. If a suitable pan is not placed on the hob the cooker will switch off.

Heat Indication - When the hob is used for a long time, residual heat remains in the heating zone for a few minutes. The code “H” appears, warning the user to avoid touching the heating zone.

Auto shutdown protection - Auto shut down is a safety protection function for your induction cooker. It will shut down automatically if you forget to turn off your cooking. When a pot is removed, the induction hotplate will stop heating that zone immediately and shut it down after the buzzer sounds for 1 minute. Reminder: People with a heart pacemaker should only use this product under the guidance of the doctor.

Installation - Cut an aperture in the table surface in accordance with the sizes shown in the drawing. For the purpose of installation, and use, a minimum of 50 mm space shall be preserved around the hole. Be sure the thickness of the table surface is at least 30 mm. Please select heat-resistant table material to avoid deformation caused by the heat radiation from the hotplate. As an alternative to the method below the hob can be flush mounted provided the adjacent surface is stainless steel or some other suitable heat proof material.

Ensure that the induction hob is well ventilated and the air inlet and outlet is not blocked. Good ventilation is vital for a good service life of the induction cooker.

Note: The safety distance between the hotplate and any cupboard above the hotplate should be at least 760 mm.
Apply suitable sealant to secure the hob to the worktop and to prevent ingress of water.

Power line connection - The socket shall be connected according to the relevant national standard or connected to a single-pole cut-out.

Power consumption - The above power may vary according to the material and the size of pan. You may have various receptacles suitable for induction heating. This induction hob is able to identify multiple heating appliances, and you can test them by the following methods: Place the appliance in the heating zone. If the corresponding heating zone displays a power level, it shows the suitability of the pan; if “U” flashes, the pan is not suitable for induction cooking.
If the base of the pan is magnetic it should be suitable for induction cooking.

If the buzzer gives out an alarm, this indicates that the pan is not suitable for the induction hotplate; the hotplate will turn off after 1 minute.

You may return new, unopened items within 30 days of receiving for a full refund. We do not accept return if its original packing box is opened.

For pick up in store:

Store address and business time:

1111 Saint-Urbain, Unit R17

Montreal, QC H2Z 1Y6

Wednesday - Monday / 11:00AM - 5:00PM (Closed on Tuesday and Holidays)

Please wait for notification before picking up your order. (Estimated waiting time: within 2 days). Your order confirmation and ID will be needed for pickup.

 

For local delivery in Montreal:

Curbside delivery, estimated delivery time: within 2 days

 

For standard shipping:

Estimated shipping time: within 2 days